In the working process of the system, after the auger sampling machine collects the representative coal sample of full section, the rotary hydraulic crane lifts the sampling head and puts the coal sample into the receiving hopper. The coal sample is uniformly and continuously sent to the crusher by the feeder, and the crushed coal sample is then divided into smaller parts, so as to obtain the required product samples. Finally, the samples are collected into the dustproof and moisture-proof sample tank.
1. Scope of application
The system can directly take samples from coal piles, train skins, car carriages and cabins. The installation methods can be divided into fixed type, track mobile and vehicle mobile.
In the working process of the system, after the auger sampling machine collects the representative coal sample of full section, the rotary hydraulic crane lifts the sampling head and puts the coal sample into the receiving hopper. The coal sample is uniformly and continuously sent to the crusher by the feeder, and the crushed coal sample is then divided into smaller parts, so as to obtain the required product samples. Finally, the samples are collected into the dustproof and moisture-proof sample tank.
2. electrical control system
The electrical control system of each sampling device can be adjusted according to the field conditions to meet the user's requirements.
Using PLC logic program control;
The zero speed switch on the equipment is used to monitor the running state of each equipment in the system.
Equipped with operation panel, sampling system adjustment and main parameter setting can be completed through the operation panel;
Display status and fault information;
To meet the needs of single or double channel operation;
The sample preparation system has two operating modes: manual and automatic.
3.Function and characteristics
Using PLC technology, high degree of automation, reliable operation;
Compact system design, space saving, suitable for low altitude installation;
The structure is easy to assemble on site;
Reasonable design to prevent plugging and scattering effectively;
Can collect coal, ore and other granular materials;
Hydraulic or electric drive safe, reliable, low maintenance;
Each sampling process ≤90s.
4. Product model and meaning
5. Equipment structure drawing
6.Product parameters
Sampling method: according to GB/T19494 standard;
Sampling depth: ≤4000mm;
Applicable moisture: less than 14%;
Material size: ≤300mm;
Sample size: ≤6mm;
Applicable model: General convertible;
Water loss: < 1%;
Controllable model: industrial control computer;
Control mode: automatic/manual.
